Filter
Top Products
352.0 Configuring TalkSwitch
First select an Extension Ring Group (300-309) that you would like to configure and
activate it. You will notice that a Ring Group must have extensions listed in the
‘Extensions to ring’ section to allow access to the other information on the tab. If
desired, name the extension in the 'Ring Group name' space.
Ring pattern:
Choose how you want the phone(s) to ring for the Ring Group.
In the “Set Ring Group” section:
To configure, select each extension that you wish to add to that Ring Group from
the left column 'Extensions available', then click '>>' to move it to the right
column 'Extensions to ring'. Repeat this process for each of the Extension Ring
Groups activated. If you wish to remove an extension from a Ring Group,
highlight that extension in the right column then click the '<<' button.
Extensions available:
This is the list of available extensions from which the Extension Ring Group
may be built. Only active extensions will be available to add to the Ring
Group.
Extensions to ring:
This is the list of extensions that will ring when the Extension Ring Group is
selected from the Auto Attendant or Local Extension. All extensions listed will
ring simultaneously when this Ring Group is dialed from an extension or at
the Auto Attendant.
TS-user manual 7th ED v3 Release.qxd 8/27/02 4:56 PM Page 35