Filter
Top Products
24 TalkSwitch User Manual
Call Back / Call Bridge Settings
TalkSwitch’s Call Back and Call Bridge features are configured from this folder.
Both of these features can reduce your company expenses by reducing long
distance costs.
Options
In this folder, advanced settings are configured including troubleshooting issues
and various operating options. Recommended for experienced users only.
Configuration considerations when connecting multiple units to a LAN.
When 2 or more units are connected to a LAN and are setup for network use, you will
have the ability to configure all units connected to the LAN via the Serial or USB
connection to one of the TalkSwitch units, or using a PC connected to the same LAN
as the TalkSwitch units.
When 2 or more TalkSwitch units are connected to the same LAN, they are designed
to act like a single phone system. For example if you have 2 TalkSwitch units
connected on the same LAN, the system will now function as a single system
supporting 8 lines, 16 local extensions and 16 remote extensions.
You will notice that on some of the configuration pages, there will be up to 4 tabs
across the top that allow you to select each TalkSwitch in the group depending on
how many are connected to the LAN. This is the primary difference between
configuring 1 unit and multiple units.
TS-user manual 7th ED v3 Release.qxd 8/27/02 4:56 PM Page 24