Filter
Top Products
58 TalkSwitch User Manual
SS
SS
tt
tt
ee
ee
pp
pp
33
33
: You can now access any
TalkSwitch extension, voice
mailbox or use Call Bridge to
make calls around the globe
just as if you were sitting in
your own office.
There are two ways to activate Call Back:
1. Auto Call Back - Auto Call Back is immediate and eliminates the initial long
distance call charge required to activate Call Back. When using Auto Call
Back, all the Call Back settings must be pre-configured before Call Back is
activated. To use Auto Call Back activation, simply dial your home/office tele-
phone number, let the call ring twice and then hang up. Call Back is instant-
ly activated!
2. Prompted Call Back - Prompted Call Back offers the convenience of
entering or changing your Call Back telephone number and message each
time Call Back is activated. To use Prompted Call Back activation, simply dial
your home/office telephone number. When the Auto Attendant answers your
call, you dial ‘6’ to access the Call Back settings through a series of prompts
which allow you to:
a) Enter the telephone number where you would like TalkSwitch to
call you.
b) Record an 'Announced' message if required. Call Back will be
activated right after you initiate Prompted Call Back and hang up.
It is important to remember that a small initial long
distance charge will be incurred at your current location when
activating Prompted Call Back.
By default, Prompted Call Back is not activated in the TalkSwitch configuration. You will
need to activate Prompted Call Back before you can use this feature.
The call back out of the system to the number programmed always uses the same line
that was dialed.
TS-user manual 7th ED v3 Release.qxd 8/27/02 4:57 PM Page 58