Filter
Top Products
Specifications
C
System
Equipment
Required
One PARTNER Plus system processor module required
(Release 2 or greater)
At least one 200 or 206 module per Attendant is required on
the system. Maximum four Attendants per PARTNER Plus
system.
Attendant must connect to a Release 2 or greater 206 module
and can plug into any extension jack except 10, 16, 22, or 28
System telephones at Destination extensions strongly
recommended (AT&T models MLS-6, MLS-12, MLS-12D,
MLS-34D, or MLC-6)
Mounting
Location
Environmental
Tempurature: 32° to +104°F (0° to +40°C)
Humidity: 0 to 95%, noncondensing
Dimensions
Weight
Electrical
Within 10 feet of the PARTNER Plus control unit and within 5
feet of a properly grounded power outlet not controlled by a
switch (connection to same power source as control unit
strongly recommended)
Wall mounting optional but recommended. Mounting bracket
supplied; #10 or smaller screw required (not supplied)
DO NOT stack multiple Attendants.
5.5 in W x 10.9 in D x 1.6 in H
2.2 cm W x 4.3 cm D x 6.3 cm H
2 lb (4.4 kg)
Voltage: 115 VAC ± 10%
Frequency: 60 Hz
Power consumption: 7 VA
Battery
Trickle-charged NiCad
Lithium coin cell
Recharge time: 18 hours
Specifications
C-1