Aastra Telecom 6753i R Telephone User Manual


 
AastraLink RP System Administrator Guide 65
Resetting Your AastraLink RP Solution
Resetting Your AastraLink RP Solution
It may be necessary to reset components of your AastraLink RP Solution should you
forget a password, or want to restore the default settings for other reasons. You can
also erase all personally identifiable information (PII) from the AastraLink RP 500
Base Unit, such as recorded messages and account information.
Factory Defaulting Aastra RP Phones
The AastraLink RP phones can be reset to the factory defaults from the phone
interface or the Aastra WebUI. In both cases you need the Administrator password to
reset a phone.
Resetting with the Aastra WebUI
The phones connected to your AastraLink RP Solution can be reset using the Aastra
Web UI, either through the Administrator software or directly through your web
browser.
There are two options for setting factory defaults using the Aastra Web UI:
• Restore to Factory Defaults
• Remove Local Configuration Settings
The "Restore to Factory Defaults" option resets the factory defaults for all of the
phone settings, and local configuration. Performing this option results in losing all
modified settings. The phone will need to be configured using Administrator,
although the current phone settings will remain in Administrator unless you also
follow Removing a Phone on page 32.
The "Remove Local Configuration Settings" option resets the settings on the local IP
phone configuration only, and only settings modified through the phone interface or
the Aastra Web UI will be lost. All Response point settings will be retained, and the
phone will still be connected to the AastraLink RP Solution system.
To restore the default settings on a phone, do the following.
1. Connect to the Aastra Web UI as an administrator following Using the Aastra Web
UI on page 56.
Note: For an administrator, the default username is “admin” and the password
field is "22222". Only an administrator can restore default settings on a phone.
2. Click Reset on the left menu of the Aastra Web UI.