Filter
Top Products
AastraLink RP System Administrator Guide 39
Advanced Administrator Options
Advanced Administrator Options
Once you have added phones and users to your system, there are a variety of options
you can change if you choose to, such as the system date and time, and the email
server to use for sending voicemail attachments.
Setting the Date and Time
You can change the date and time of the base unit clock, which appear on the Base
Unit page. The date and time display can be used to identify backups and other
activities on the base unit. The display is refreshed from the base unit clock
periodically. At any given time, it may not match the base unit clock precisely.
You can also specify a new time zone for the base unit, if necessary, and specify
whether you want to manually or automatically adjust the time for changes such as
daylight savings.
Note: When you confirm the changes that you want to make, the base unit will restart,
which could take several minutes. Notify users that incoming calls will not get
through and active calls may be disconnected when the base unit restarts.
To change the date and time on the base unit, do the following.
1. Click the Base Unit button.
2. Click Change Date and Time under the heading Properties.
3. In the Set Date and Time on Base Unit dialog box, select the options that you
want and click OK.
Note: The values in the base unit date and time options initially reflect the current
settings from the base unit. Because these settings are not updated in real time
when the dialog box is open, they will not match the base unit's current date and
time for long.