Filter
Top Products
Sample Configuration Scripts 65
The sample summary shown next contains changes that were made to
the default values for a primary VCX Connect server configured to run in
one of 3Com’s testing labs.
-------------------------- CONFIGURATION SUMMARY --------------------------
Hostname: vcxpri
IP Interfaces: Device IP Address Network Mask Default Gateway
eth0 10.230.143.24 255.255.255.0 10.230.143.1
DNS Servers: 151.104.25.103
205.142.126.139
Search Domains: ne.3com.com
NTP Servers: 0.pool.ntp.org
1.pool.ntp.org
2.pool.ntp.org
Time Zone: America/New_York
---------------------------------------------------------------------------
Is all of the above information correct? [yes] :
Press the Enter or Return key to accept the data as displayed. The script
then completes the network configuration and then begins the VCX
Services configuration.
---------------------------------------------------------------------------
Please wait while the wizard completes.
Saving configuration...Done.
---------------------------------------------------------------------------
------------ Welcome to the VCX Service Reconfiguration Wizard ------------
---------------------------------------------------------------------------
------------------------ Configuring VCX Services -------------------------
Services running on this system need to communicate with other systems and
devices in order to operate. In the next series of questions, you will be
asked for information about these, and for other global parameters.
VCX Connect can be configured with an optional Secondary server for
redundancy. If a Secondary is used, the systems' message and configuration
databases are mirrored, providing real-time failover capabilities. Enter
the IP address of the Secondary server here, or leave this input blank if
no Secondary is present.