3Com 2101 Cordless Telephone User Manual


 
70 CHAPTER 7: GETTING MORE FROM YOUR TELEPHONE SYSTEM
Hunt groups can be static or dynamic:
If you are in a static hunt group, you are always part of that group
along with the other group members.
If you are in a dynamic hunt group, you must log in to the group to be
part of it.
To log in to a dynamic hunt group using your NBX Telephone:
1 Pick up the handset.
2 Press the Feature button followed by the hunt group number that is
assigned by your administrator. The ranges of possible hunt group
numbers are shown in Table 11
.
3 Dial the hunt group password, which is assigned by your administrator.
4 Press #.
To log out of a dynamic hunt group using your NBX Telephone:
1 Pick up the handset.
2 Press the Feature button followed by the hunt group number.
3 Hang up the telephone.
Your administrator can configure a hunt group to an Access button on an
NBX Business Telephone. To log in to or to log out of the hunt group,
press the specified Access button. The indicator next to the button lights
to show that you are logged in. On the NBX Basic Telephone, the display
panel shows the message IN.
To log in to a dynamic hunt group using the NBX NetSet utility:
1 Log in to NBX NetSet > User Information > Hunt Groups and select
the number of the hunt group that you want to log in to.
2 Click Log In, and then click Close.
If you log in to a dynamic hunt group and do not answer a call when it
rings on your telephone, the system logs you out of the group.
Table 11 Hunt Group Numbers (Assigned by the Administrator)
On an NBX 100 system On a SuperStack 3 NBX system
850 – 879 850 – 879 and 900 – 969