3Com 2101 Cordless Telephone User Manual


 
Putting a Call on Hold 45
On an NBX Basic Telephone:
1 Press the Hold button.
2 To obtain dial tone to make the second call:
If you DID NOT hang up the handset, press and release the hook
switch.
If you DID hang up the handset, pick it up again.
3 When you hear dial tone, dial the second call.
To Put More Than
One Call on Hold
To place more than one call on hold:
On an NBX Business Telephone:
1 To place the current call on hold, press the Hold button.
2 Make or receive a new call:
To make a call, press one of the Access buttons that is currently not
being used and when you hear dial tone, dial the call.
To receive a call, locate the flashing status light that indicates the
incoming call and press the associated Access button.
3 To place the new call on hold, press the Hold button.
4 To return to either call, press the appropriate Access button.
5 To place or receive another new call, repeat the previous steps.
The number of simultaneous calls that you can have on your NBX
Business Telephone is limited by the number of Access buttons defined
for your extension. The default is the three buttons at the bottom of the
row on the right side of your telephone. Your administrator can verify the
number and location on your telephone.
On an NBX Basic Telephone
1 Press the Hold button.
2 Make or receive a new call:
To obtain dial tone and make a second call:
If you DID NOT hang up the handset, press and release the hook
switch.
If you DID hang up the handset, pick it up again.
When you hear dial tone, dial the second call.