Programmable Access Buttons on the Business Telephone 19
Programmable
Access Buttons on
the Business
Telephone
Figure 2 displays the 18 programmable Access buttons. The One-Touch
Speed Dials screen in the NBX NetSet utility shows your telephone’s
current button mappings.
Figure 2 Access Buttons
Default Settings Access buttons have these default settings, which your administrator can
change:
1 Feature button — Allows you to access features that are not directly
assigned to an Access button on your telephone. See the NBX Feature
Codes Guide in the NBX NetSet utility for a list of features and codes.
2 Direct Mail Transfer button — Sends a call directly to another user’s
voice mailbox. See “Direct Mail Transfer”
in Chapter 7.
3 Call Park button — Allows you to place a call in a “holding pattern” so
that it can be retrieved from any other telephone on the system. See
“Call Park”
in Chapter 7.
4Flash button (analog line only) — Toggles the current call to another
call if the line has the Call Waiting service from your local telephone
company, or enables call transfer if the line has the Call Transfer service.
5 Unassigned — This button has no default assigned function.
6 Release button — Disconnects calls. This feature is commonly used
when you use a telephone headset. See “Using a Headset”
in Chapter 6.
7 Typically, you can use these nine buttons for personal speed dial settings,
although the administrator can map them to other features. See “Speed
Dials” in Chapter 6.
8 In most circumstances, your administrator designates these three system
appearance buttons as lines for incoming and outgoing calls.
1
2
3
4
5
6
7
8