Filter
Top Products
www.vtechphones.com
38
System setup
Recording a new ringer
Each recordable ringer can be up to 15 seconds. Depending on the remaining
record time, you can record multiple ringers. To increase the record time, you
need to delete a ringer melody (see page 37).
To record a ringer:
1. Press
MENU/SEL when in idle mode to enter the main menu.
2. Press the
UP and DOWN NavKeys to select Ringers, then press
MENU/SEL to enter the Ringers menu.
3 Press the
UP and DOWN NavKeys to highlight Record New Ringer, then
press MENU/SEL.
4. Press the
RECORD softkey to begin recording. Record Ringer after tone
will be shown on the display, then you will hear a tone.
5. Record your ringer melody, then press the
STOP softkey.
6. When you nish recording, you can:
•
PLAY - Press the PLAY softkey to review the recorded ringer.
•
SAVE - Press the SAVE softkey to save the recorded ringer.
-OR-
• Press
OFF/CANCEL to discard the new recording and exit to the
Record New Ringer menu
If you save the ringer, you will be prompted to enter a name for the
recorded ringer.
• Use the character chart (page 74) to enter the ringer name (up to 10
characters), then press the SAVE softkey to save your recorded ringer.
Your new recorded ringer will appear on the
Ringer Melody list (page 37).
For optimal
recording, place
the handset
microphone nine
inches away from
the source you
wish to record.
•
Ringers
Ringer for HOME
Ringer for CELL 1
Ringer for CELL 2
Record New Ringer
Press RECORD
to start recording
Remaining record
time: 0:10
Record New Ringer
RECORD
Recording Complete
Press SAVE
to save recording
or PLAY to review
Record New Ringer
SAVE
PLAY
Recording...
Record New Ringer
STOP