Filter
Top Products
www.vtechphones.com
97
Basic operation
Answering system
If you pause for
more than four
seconds during
remote access,
“Press 5 for help.”
will be announced.
If no commands
are entered for
approximately
20 seconds,
the call will end
automatically.
If memory is full
or the answering
system is off, the
system will answer
after 10 rings, and
announce
"Please
enter your remote
access code."
Enter your remote
access code to
enter the remote
access mode.
•
•
Remote access
You can access your answering system remotely by dialing your home telephone number from any
touch-tone telephone.
To remotely access your answering system:
1. Dial your telephone number from any touch tone telephone.
2. At anytime when the answering system answers the call, enter
5000 (default remote access code,
see page 57 to change this setting).
• If you have new messages, the system will automatically announce the number of new
messages and then begin to play them.
3. Enter the following remote commands on a touch-tone phone.
Remote command Action
1 Play all messages.
2 Play only new messages.
3 Delete the current message (during playback).
33 Delete all old messages.
4 Repeat the current message (during playback).
5 Pause/resume message (during playback).
5 Hear a list of remote commands.
6 Skip to the next message (during playback).
7 Record a new announcement.
0 Turn the answering system on or off.
# Stop message playback
Hang up Save all undeleted messages.
4. Hang up to end the call and save all undeleted messages.
Answering system