Filter
Top Products
www.vtechphones.com
76
Telephone operation
Creating a new phone book entry (continued)
Using the telephone base
1. Press the MENU softkey when the telephone base is in idle mode.
2. Press the
SELECT softkey to enter the Phone Book menu.
3. Press the
NEW softkey to create a new phone book entry.
4. Enter the name (up to 16 characters) by using the dial pad (0-9). See the character chart on page 74.
Each time a dial key is pressed, the characters on that key will be highlighted according to the
number of key presses. For instance, for the letter a, press the
2 dial pad key ve times.
Press the LEFT and RIGHT NavKeys to move the cursor left and right.
Press the ERASE softkey to backspace and delete a highlighted character.
5. Press the
DONE softkey to store the name.
6. Enter the telephone number (up to 32 digits) by using the dial pad (
0-9).
• Press the
LEFT and RIGHT NavKeys to move the cursor left and right.
• Press the
ERASE softkey to backspace and delete a highlighted digit.
•
Press and hold # until a P appears on the display to enter a pause.
7. Press the
DONE softkey when nished entering the telephone number.
8. Press the
SAVE softkey to store the entry.
–OR–
Press the
UP and DOWN NavKeys to highlight and edit the name or number (see steps 4 and 6),
then press the SAVE softkey to store the entry.
•
•
•
Press CANCEL at
anytime to discard
any changes and
return to the Phone
Book menu.
The display will
timeout and return
to the Phone Book
menu if no keys are
pressed within 60
seconds.
•
•