Filter
Top Products
www.vtechphones.com
103
Appendix
Troubleshooting
Problem Suggestion
My cell phone
disconnects with the
telephone base.
Turn off your cell phone, then turn it on again.
Make sure that you are not using your cell phone when on a
CELL call.
Verify that the
LS5145 is an authorized device on your cell phone and is allowed to connect
automatically without conrmation (refer to user’s manual of your cell phone for more
information).
•
•
•
My cell phone is
connected to the
telephone base, but I
cannot make a CELL
call.
Make sure that your cell phone is connected and on the Active Devices list (page 26) and it is in
idle mode when you are trying to make a CELL call.
• Make sure that your cell phone is compatible.
• For some smartphones, make sure that the cellular function is turned on.
•
Bluetooth System
Busy appears on the
display.
•
Make sure that your cell phone is in idle mode when connected and on the Active Devices list.
• Make sure that your cell phone or headset is not connected to any other Bluetooth device.
• The
LS5145 can only use one Bluetooth device at a time.
The PIN on the
telephone base does
not work.
The default PIN is 0000.
• If you change the PIN on the telephone base, it will appear on the telephone base display in the
pairing process.
•
I cannot hear
any audio on my
telephone system
when on a CELL call.
Reset the telephone base. Unplug the unit’s electrical power and remove any spare batteries.
Wait for approximately 15 seconds, then plug it back in.
• Turn off your cell phone, then turn it on again.
•