Filter
Top Products
www.vtechphones.com
21
Bluetooth
Setting up headset
Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user's
manual to determine the headset's PIN and how to set your headset in
discoverable mode.
To pair and connect a headset:
1. Using the telephone base, press the MENU softkey while in idle mode.
2. Press the UP and DOWN NavKeys to highlight Bluetooth, then press
the SELECT softkey to enter the Bluetooth menu.
3. Press the
SELECT softkey to enter the Set up Headset menu.
• If a device is already connected to the telephone base, press the
OK softkey to temporarily disconnect the device(s) and continue
the pairing process.
4. Using your headset, set your headset in discoverable mode.
5. Using the telephone base, press the
NEXT softkey on the telephone
base to search for your headset.
6. Once the telephone base nds your headset, select it and press the
PAIR softkey. If the telephone base cannot nd your headset, press
the FIND softkey to search again, and make sure that your headset is
in discoverable mode.
7. Enter the PIN of your headset, then press the
DONE softkey on the
telephone base (for most headsets, the PIN is 0000).
If you have
any device(s)
connected to the
telephone base
when pairing,
Connected
devices will
be temporarily
disconnected
will appear on
the display.
•
Bluetooth
Main Menu
Voice Mail
Intercom
Bluetooth
SELECT
Bluetooth
Set up Cellular
Set up Headset
Active Devices
SELECT
Set your Headset in
Discoverable mode,
then press NEXT
NEXT
Set up Headset
Enter PIN:
0000
Set up Headset
DONE
HELP
ERASE
Mary’s Headset
Headsets Found
FIND
PAIR
INFO