Filter
Top Products
www.vtechphones.com
42
System setup
Setting date
If you subscribe to caller ID service provided by your local telephone
company, the time and date will automatically be set with an incoming
HOME call.
To manually set the date:
1. Press the
MENU softkey when in idle mode to enter the main menu.
2. Press the
UP and DOWN NavKeys to select Settings, then press the
SELECT softkey to enter the Settings menu.
3. Press the
SELECT softkey to select Set Date.
4. Use the dial pad (
0-9) to enter the year, month (01-12) and day (01-31).
You can also use the UP and DOWN NavKeys to set the year, month
and day.
5. Press the
SET softkey to save the setting. A tone will sound and the
screen will display the current date set.
Setting time
If you subscribe to caller ID service provided by your local telephone
company, the time and date will automatically be set with an incoming
HOME call.
To manually set the time:
1. Follow steps 1 and 2 in the above section.
2. Press the
UP and DOWN NavKeys to select Set Time, then press the
SELECT softkey.
3. Use the dial pad (
0-9) to enter the hour (01-12) and minute (00-59), and
the dial pad key
2 for AM and the key 7 for PM. You can also use the
UP and DOWN NavKeys to set the hour, minute, and AM/PM.
4. Press the
SET softkey to save the setting. A tone will sound and the
screen will display the current time set.
If Invalid date
appears on the
display, make sure
you are entering a
number between
01 and 12 for the
month, a number
between 01 and 31
for the day, and the
current year.
If Invalid time
appears on the
display, make sure
you are entering a
number between
01 and 12 for the
hour and a number
between 00 and 59
for the minute.
•
•
Settings
Set Date
Set Time
Keypad Tone
SELECT
Set Date
SET
YYYY/MM/DD
2007/01/01
INFO
Set Time
SET
12:00 AM
INFO
Settings
Set Date
Set Time
Keypad Tone
SELECT