Filter
Top Products
www.vtechphones.com
52
This section
explains the
setup of your
answering system.
For operational
information, see
the Answering
system section
beginning on page
93.
To record a memo,
see the Recording
a memo section on
page 96.
•
•
Answering system settings
In the Answering System menu, you can set the answering system on or
off, change the outgoing announcement, remote access code, the number of
rings, and the answering system message alert tone. The answering system
only answers incoming HOME line calls.
To enter the Answering System menu:
1. Press the
MENU softkey when in idle mode to enter the main menu.
2. Press the
UP and DOWN NavKeys to select Answering System, then
press the SELECT softkey to enter the Answering System menu.
While in the
Answering System menu, press the UP and DOWN NavKeys
to highlight one of the items below, then press the SELECT softkey.
Answer On/Off - Set the answering system on or off (page 53).
Announcement - Review, record, or delete the outgoing
announcement (page 54).
Record Memo - See page 96.
Number of Rings - Set the number of rings before the answering
system answers an incoming call (page 56).
Call Screening - Listen to an incoming caller leaving a message (page 57).
Remote Code - Change the remote access code (page 57).
Msg Alert Tone - Set the message alert tone on or off when you have
a new answering system message (page 58).
After a setting has been saved or set, you will hear a conrmation tone and
the display will return to the Answering System menu.
While in the
Answering System menu:
Press CANCEL to return to a previous menu.
Press and hold CANCEL to return to the idle screen.
•
•
•
•
•
•
•
•
•
System setup
Main Menu
Intercom
Bluetooth
Answering System
SELECT
Answering System
Answer On/Off
Announcement
Record Memo
SELECT