Filter
Top Products
www.vtechphones.com
50
Ringer volume
You can adjust the ringer volume to a comfortable level on the telephone
base. The ringer can also be turned off so the telephone base will not ring
during incoming calls.
To adjust the telephone base ringer volume:
1. Press the
MENU softkey when in idle mode to enter the main menu.
2. Press the
UP and DOWN NavKeys to select Ringers, then press the
SELECT softkey to enter the Ringers menu.
3. Press the
UP and DOWN NavKeys to highlight:
Ringer for HOME - Set the ringer volume and melody for the
HOME line.
Ringer for CELL 1 - Set the ringer volume and melody for the
rst connected cell phone on the Active Devices list (page 26).
Ringer for CELL 2 - Set the ringer volume and melody for the
second connected cell phone on the
Active Devices list (page 26).
4. Press the SELECT softkey to conrm your selection.
5. Press
SELECT softkey again to select Ringer Volume.
6. To change the ringer volume:
• Press the
UP and DOWN or LEFT and RIGHT NavKeys.
To turn off the telephone base ringer:
Press the DOWN or LEFT NavKeys until the display shows
Ringer Off. You can also press the OFF softkey.
7. Press the SET softkey to save the setting.
•
•
•
•
Even if the ringer
volume is off, the
telephone base or
handset will ring at
the lowest volume
setting during an
incoming intercom
call.
•
System setup
SET
OFF
Ringer Volume
Main Menu
Answering System
Settings
Ringers
SELECT
Ringers
Ringer for HOME
Ringer for CELL1
Ringer for CELL2
SELECT
Ringer for HOME
Ringer Volume
Ringer Melody
SELECT
Ringer Volume
SET
OFF
Ringer Off