Filter
Top Products
www.vtechphones.com
20
Setting up cellular
Before you begin, make sure that your Bluetooth enabled cell phone is not
connected to any other Bluetooth device. Refer to your cell phone user's
manual to learn how to search for or add new Bluetooth devices.
To pair and connect a cell phone:
1. Press the
MENU softkey on the telephone base while in idle mode.
2. Press the UP and DOWN NavKeys to highlight Bluetooth, then press
the SELECT softkey.
3. Press the SELECT softkey to enter the Set up Cellular menu.
• If a device is already connected to the telephone base, press the
OK softkey to temporarily disconnect the device(s) and continue
the pairing process.
4. Press the NEXT softkey to set the telephone base in discoverable mode.
5. Using your cell phone, turn on the Bluetooth feature and search for or
add new devices.
6. Once your cell phone nds the VTech LS5145 telephone base, select it.
7. Using your cell phone, enter the PIN of the telephone base (the default
PIN is 0000) to continue the pairing process.
8. Press the YES softkey on the telephone base to connect to your cell
phone when the pairing process is complete.
• If successful, Cellular setup completed will be displayed on the
telephone base.
• If you already have two devices on the Active Devices list, press
the YES softkey to connect to your paired cell phone. You will then
be prompted to replace an existing device on the Active Devices list
(page 26).
When a device is connected, the 1 and/or 2 status icons will appear
on the display.
If you have any
device(s) connected
to the telephone
base when pairing,
Connected
devices will
be temporarily
disconnected
will appear on the
display.
•
Bluetooth
Cellular setup
completed
Main Menu
Voice Mail
Intercom
Bluetooth
SELECT
Bluetooth
Set up Cellular
Set up Headset
Active Devices
SELECT
Set your Cellular to
search for devices,
then press NEXT
NEXT
Set up Cellular
VTech LS5145
in Discoverable Mode
PIN=0000
HELPSTOP
Set up Cellular
NOYES
Pairing complete
Connect to
Cellular ?
Set up Cellular