Filter
Top Products
www.vtechphones.com
26
Connected devices
appear on the
Active Devices list
automatically.
•
Active devices
Only devices on the Active Devices list can establish a Bluetooth
connection with the telephone base. Although two paired devices can be
connected to the telephone base, only one Bluetooth cell phone or headset
can be on a call at a time.
To enter the Active Devices list:
1. Press the
MENU softkey on the telephone base while in idle mode.
2. Press the
UP and DOWN NavKeys to highlight Bluetooth, then press
the SELECT softkey to enter the Bluetooth menu.
3. Press the
DOWN NavKey to highlight Active Devices, then press the
SELECT softkey.
On the Active Devices list, you may see the following status symbols:
X in front of the device indicates that it is disconnected.
in front of a device indicates that it is connected to the telephone base.
))) in front of a device indicates that the telephone base is trying to
connect to that device.
•
•
•
Bluetooth
P
Main Menu
Voice Mail
Intercom
Bluetooth
SELECT
Bluetooth
Set up Cellular
Set up Headset
Active Devices
SELECT
Active Devices
OPTIONS
INFO
x 1 John’s Cell
P2 Mary’s Headset
CONNECT
While in the Active Devices list, you can select:
CONNECT - Press the CONNECT softkey to connect to a disconnected device.
DISCONN - Press the DISCONN softkey to disconnect a device.
INFO - Press the INFO softkey to view the current status and full name of a Bluetooth device.
OPTIONS - Press the OPTIONS softkey to replace or remove a device.
If you experience difculty, make sure that the device is on and not connected to any other Bluetooth
device. See the Troubleshooting section for more information (page 100).
•
•
•
•