Filter
Top Products
www.vtechphones.com
102
Troubleshooting
Problem Suggestion
I cannot put my headset
in discoverable mode.
• Refer to the user’s manual of your headset for information on how to set your headset in
discoverable mode. For many headsets, they are by default in discoverable mode. For other
headsets, you may have to turn on the headset and press and hold the call button for a certain
time period.
• Make sure that the headset is not connected to any other device(s) in order to successfully pair
and connect to the telephone base.
• Carefully follow the pairing process on page 21.
• Reset the telephone base. Unplug the unit’s electrical power. Wait for approximately 15
seconds, then plug it back in. Repeat the above suggestions.
I cannot nd the
LS5145 on my cell.
Make sure that the telephone base is in discoverable mode. Carefully follow the setup
instructions on page 20.
• Make sure that you manually set your cell phone to nd or search for devices.
• Remove the
LS5145 from your cell phone's handsfree device history list (see the user's
manual of your cell phone for more information).
• Turn off your cell phone, then turn it on again.
Reset the telephone base. Unplug the unit’s electrical power and remove any spare batteries.
Wait for approximately 15 seconds, then plug it back in. Repeat the above suggestions.
•
•
I don't know how to
search for or add new
devices on my cell
phone.
• Most cell phones have the Bluetooth feature in the connection or setup menus. Please refer to
the user’s manual of your cell phone.
• In general, press the menu key on your cell phone, then look for the Bluetooth menu, in the
settings or connection menu. In the Bluetooth menu, select the option to search for or add new
devices.