www.vtechphones.com
36
System setup
Even if the ringer
volume is off, the
telephone base or
handset will ring at
the lowest volume
setting during an
incoming intercom
call.
•
Ringer volume
You can change the handset ringer volume to a comfortable level. The ringer
can also be turned off so the phone does not ring during incoming calls.
To adjust the handset ringer volume:
1. Press
MENU/SEL when in idle mode to enter the main menu.
2. Press the
UP and DOWN NavKeys to select Ringers, then press
MENU/SEL to enter the Ringers menu.
3. Press the
UP and DOWN NavKeys to highlight:
•
Ringer for HOME - Set the ringer volume and melody for the
HOME line.
•
Ringer for CELL 1 - Set the ringer volume and melody for the
rst connected cellular phone in the Active Devices list (page 26).
• Ringer for CELL 2 - Set the ringer volume and melody for the second
connected cellular phone in the Active Devices list (page 26).
4. Press MENU/SEL to enter the desired ringer setting menu.
5. Press
MENU/SEL again to adjust the volume setting.
6. To increase and decrease the handset ringer volume:
• Press the
UP and DOWN NavKeys, or
• Press the
LEFT and RIGHT NavKeys
-OR-
To turn off the handset ringer:
• Press the
OFF softkey, or
• Press the
DOWN or LEFT NavKey until Ringer Off is shown on
the display.
7. Press the
SET softkey or MENU/SEL to save the setting.
Ringers
Ringer for HOME
Ringer for CELL 1
Ringer for CELL 2
Record New Ringer
Ringer Volume
SET
OFF
Ringer Volume
SET
OFF
Ringer Off
Ringer for HOME
Ringer Volume
Ringer Melody