Filter
Top Products
www.vtechphones.com
45
System setup
System setup
Clearing the voice
mail indication
does not delete
any voice mail
messages.
If you subscribe
to voice mail
services, your
local telephone
company may alert
you to new voice
mail messages
with a stutter
(broken) dial tone.
Contact your
local telephone
company for more
information about
voice mail service.
All handsets and
the telephone base
share the same
voice mail access
code, and this
voice mail access
code can only be
set or changed
on the telephone
base.
•
•
•
•
Voice mail codes
The LS5145 allows you to program your voice mail function codes so you can easily access voice
mail features by using softkeys on the handset and the telephone base.
If a PIN or password is needed after dialing the voice mail code,
press and hold the # key to enter
a two-second dialing pause. A P appears on the screen after the last digit of the code to indicate a
pause has been added. If you wish to add a pause longer than two seconds, press and hold # again
to add another two-second pause.
To program your voice mail access number:
1. Press the
MENU softkey on the telephone base when in idle mode to enter the main menu.
Settings
Language
LCD Contrast
Clear Voice Mail
SELECT
Clear Voice Mail
NO
YES
Clear Voice Mail
Indication?
Clearing voice mail
If you subscribe to voice mail services provided by the local telephone
company, the MESSAGE light on the telephone base will ash and New
Voice Mail will display on the telephone base when you have a new voice
mail message. If your telephone system indicates that there is voice mail, but
you are sure that you have no new voice mail messages, you can manually
turn off the voice mail indication.
To manually turn off the MESSAGE light:
1. Press the
MENU softkey when in idle mode to enter the main menu.
2. Press the
UP and DOWN NavKeys to select Settings, then press the
SELECT softkey to enter the Settings menu.
3. Press the
UP and DOWN NavKeys to highlight Clear Voice Mail, then
press the SELECT softkey.
4. Press the YES softkey to clear the voice mail indication. A conrmation tone
will sound and the screen will show
[ Voice Mail Indication cleared ].