Filter
Top Products
There are five locations for Local Area
Codes. Programming a Local Area Code
will cause the Caller ID number to dis-
play and dial a call in a 10-digit format.
Program each area code that you can
make 10-digit calls to. To program the
Area Codes, enter the programming
mode and turn the [JOG] knob until the
display shows AREA CODEs. The LCD
will display:
Press the NAVIGATION [>] key to begin
programming the Area Codes. Rotate the
[JOG] knob to select the type of area
code. The LCD will display:
then
•
•
NOTE
: In the above examples, no area
codes are programmed. Numbers would
replace the text “(empty)” if a location
were previously programmed.
Press the NAVIGATION [>] key to begin
programming one of the area codes.
Enter the three digits using the keypad.
For example the LCD will display:
Use the NAVIGATION [<] key to move
the cursor left or erase a number. Press
the [Save] key to confirm the selection.
After approximately five seconds, the dis-
play will return to the highest level of the
current setting. Repeat the above steps
to program additional area codes.
Reset All Programming
This feature returns all programming to
the factory default settings. It erases the
Caller ID records, Directory and Speed
Dial programming at the station. NOTE
:
The Public Directory will be temporarily
erased, but will regain its programming
shortly after the reset is complete. To
perform the Reset All function, enter the
programming mode and turn the [JOG]
knob until the display shows RESET
ALL. The LCD will display:
Press the NAVIGATION [>] key to begin
the Reset All process. The LCD will dis-
play:
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 49
AREA CODEs
Turn Dial
>: enter
RESET ALL
Turn Dial
>: enter
RESET ALL?
REMOVE:reset all
Home Area Code
= (empty)
Turn Dial
>: enter
Loc.Area Code 1
= (empty)
Turn Dial
>: enter
Loc.Area Code 5
= (empty)
Turn Dial
>: enter
Loc.Area Code 2
= 123
(Enter digits)
SAVE:save?
Loc.Area Code 2
= 123
Programmed!