Verizon NSQ412 Telephone User Manual


 
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 21
An alternate method to start the
(Auto)Redial function is to press an idle
[CO Line] key followed by pressing the
[(AUTO)REDIAL] key twice within 3-sec-
onds.
Pick up the handset, or press [SPEAK-
ER] or [HEADSET] keys to stop the
(Auto)Redial function and talk with the
called party. NOTE
: Pressing any other
key except the Volume [ ] and [ ] will
cancel the (Auto)Redial operation.
Prime Line Preference
The telephone’s Prime Line Preference
determines the priority that idle CO Lines
are picked up when going off-hook from
the idle state. The line preference is
selected in programming mode. Line 1 is
selected by default. If the preferred line is
in use by another station, the next higher
idle CO Line is picked up.
CO Line Privacy
The telephone has CO Line Privacy. This
feature prevents another station from
picking up a CO Line that is in use. This
feature automatically activates when a
CO Line is used.
CO Line privacy can be disabled by
pressing the [CO Line] key used at the
original station. A beep is heard when
this is done. The privacy can be recov-
ered by again pressing the in-use [CO
Line] key. A double beep is heard when
this is done.
NOTE
: A non-system telephone does not
have line privacy on any system station.
Intercom Operation
To make an intercom call with the hand-
set, press the [INTERCOM] key and pick
up the handset. The LCD will display:
Dial the desired station number. For
example, station 12 calls station 15. The
LCD for station 12 will display:
The LCD for station 15 will display:
The display of the stations will return to
normal after the intercom call is finished.
If the called station is idle, the calling sta-
tion will get ring back tone. If the called
station is busy, the calling station will get
busy tone. If the called station has DND
active, the calling station will get the
DND tone. NOTE
: If the called station is
not entered within approximately 10-sec-
onds after pressing the [INTERCOM]
key, the intercom trunk will be automati-
cally released.
Any station can pick up an intercom call
directed to another station. To do so,
press the [INTERCOM] key.
ICM
CID:100/198
ICM 15
CID:100/198
ICM 12
CID:100/198