Filter
Top Products
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 31
Press the [SAVE] key when finished
entering the number. Press the [SPD#]
key to complete the edit process and
save the information in the Speed Dial
key. The LCD will display:
Dialing a Speed Dial Entry
To dial a Speed Dial key, press the
[SPD#]. The display will show the infor-
mation. For example, the LCD will dis-
play:
Press the Center of the [JOG] knob. The
telephone will go off-hook on an available
CO Line in the previous mode (handsfree
or headset) and dial the number.
or
Pick up the handset. The telephone will
go off-hook on an available CO Line and
dial the number.
or
To select a desired CO Line and dial,
while viewing the entry, press the desired
[CO Line] key.
In all cases, the LCD will display:
Erasing a Speed Dial Entry
To erase the information in a Speed Dial
location, press the [SPD#]. The display
will show the information. For example,
the LCD will display:
Press the [REMOVE] key to start the
delete process. The LCD will display:
Press the [REMOVE] key again within 3-
seconds to delete the item. The LCD will
display:
CALLER ID OPERATION
When a telephone call is received, the
NSQ412’s display can show the calling
person’s name and the calling number.
You must have Caller ID with name and
number delivery as well as Call Waiting
with Caller ID service to take full advan-
tage of the Caller ID features. The tele-
phone does not provide these features,
you must order them beforehand from
your local telephone company. Check
with your local phone company to con-
firm that both of these services are avail-
able in your area.
TERRY
(Enter number)
SAVE:save?
Save to SPD#?
<>:select
Saved!
AARON
1234567
*:EDIT
AARON
1234567
*:EDIT
AARON
1234567
REMOVE:remove?
1234567
00:01
CID:100/198
(empty)
Removed!