Filter
Top Products
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 44
Delayed Ring Programming
A station may be set to delay the phone
from ringing from 2 to 30 seconds after a
call comes in. This feature will function
on all telephone lines connected to the
station when active. To program the
Delayed Ring, enter the programming
mode and turn the [JOG] knob until the
display shows DELAY RING. The LCD
will display:
Press the NAVIGATION [>] key to begin
programming the Delayed Ring. Rotate
the [JOG] knob to change the delay time.
The LCD will display:
or
•
•
Press the [SAVE] key to confirm the
selection. For example, the LCD will dis-
play:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Line Usage Programming
Each of the lines can be disabled. This
will turn off the [CO Line] key and LED.
Use this for any lines on the station that
are not wired to a telephone number. To
program the Line Usage, enter the pro-
gramming mode and turn the [JOG] knob
until the display shows LINE USAGE.
The LCD will display:
Press the NAVIGATION [>] key to begin
programming the Line Usage. Rotate the
[JOG] knob to change the CO Line num-
ber. The LCD will display:
•
•
Press the NAVIGATION [>] key to select
the CO Line. Rotate the [JOG] knob to
change the Line Usage. For example,
the LCD will display:
DELAY RING
Turn Dial
>: enter
LINE USAGE
Turn Dial
>: enter
L1 USAGE
Turn Dial
>: enter
L4 USAGE
Turn Dial
>: enter
L3 USAGE
= On
Turn Dial
SAVE:save?
DELAY RING
= Off
Turn Dial
SAVE:save?
DELAY RING
= 02 sec
Turn Dial
SAVE:save?
DELAY RING
= 30 sec
Turn Dial
SAVE:save?
DELAY RING
= 16 sec
Programmed!