Filter
Top Products
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 8
MSG Wait/New CID LED: Will indicate
when a voicemail message has been
left in your telephone company voice-
mail box and when new Caller ID
records have been received.
[CID LIST] key: Used to access the
Caller ID records.
[DIRECTORY] key: Used to access the
Private and Public Directories.
[CONF] key: Used to conference two
calls with the station.
Volume [ ] and [ ] keys: Use to adjust
the Handset, Speakerphone, Headset
and Ringer volume.
[FLASH] key: Provides a momentary
break in the telephone line for access-
ing special features like Call Waiting.
[RELEASE] key: Used to quit the cur-
rent function or display.
[REMOVE] key: Used to delete the pro-
gramming or Caller ID in the display.
[SAVE] key: Used to store the displayed
programming.
[PROGRAM] key: Used to start the pro-
gramming operation.
[LINE 1], [LINE 2], [LINE 3] and [LINE
4] keys: Used to manually select a line.
The integrated LEDs will indicate each
line status.
[JOG] knob and [DIAL] key: Rotating
the [JOG] knob changes the displayed
items. Pressing the [DIAL] button will
dial the telephone number shown in
the display.
Microphone (on bottom-side): Used for
the speakerphone outgoing audio.
Power Data Jack 1 Data Jack 2
jack Line 3 Line 4
Telephone Jack Telephone Jack
Line 1/2 Line 3/4
Line Jacks: Jack L1/L2 is used for tele-
phone lines 1 and 2. Jack L3/L4 is
used for telephone lines 3 and 4. Data
jacks 1 and 2 are used to connect a
fax, modem or other device through
the NSQ412 to the telephone line.
Power Jack: The jack for connecting the
a. c. power adapter to the station.