Filter
Top Products
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 33
Then L1 begins ringing and the LCD will
display:
Then L2 begins ringing and the LCD will
display:
The Caller ID information from the other
lines can be viewed by pressing the
[CALLER] key. The display will then
show the next higher ringing line. If there
are no higher lines ringing, the display
will go to the general display. Following
the general display, the lowest ringing
line will be displayed.
Using the example shown above, press-
ing the [CALLER] key after L2 begins to
ring will cause the display to show the L3
info.
Pressing the [CALLER] key again shows
the general display:
Pressing the [CALLER] key again shows
L1 info:
Pressing the [CALLER] key again shows
L2 info:
There are other possible displays that
depend upon the Caller ID info. They
include:
Display Meaning
Private Name The calling party
has blocked the
name information
Private Number The calling party
has blocked the
number information
Unknown Name The phone company
is unable to provide
the caller’s name
Unknown Number The phone company
is unable to provide
the caller’s number
Unknown Caller The call information
is out of area
No CID displayed No data was
received or the data
was bad
NOTE 1
: When multiple CO Lines are
ringing at the same time, going off-hook
will cause the telephone to answer the
CO Line that has the Caller ID informa-
tion shown in the LCD display.
NOTE 2
: The display may not show the
Caller ID information if the call is
answered before the second ring.
12/26 12:08P
L3
JOHN SMITH
5552222
12/26 12:08P
L3
JOHN SMITH
5552222
12/26 12:09P
EXT 12
CID:103/200
12/26 12:08P
L1
JANE DOE
5553333
12/26 12:08P
L1
JANE DOE
5553333
12/26 12:09P
L2
JIM JONES
5554444
12/26 12:09P
L2
JIM JONES
5554444
<