Filter
Top Products
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 46
Press the NAVIGATION [>] key to select
the CO Line. Rotate the [JOG] knob to
change the Line Group. The LCD will dis-
play:
•
•
or
NOTE
: Two different lines on the same
station cannot belong to the same
Group. That selection will not be avail-
able during programming.
Press the [SAVE] key to confirm the
selection. For example, the LCD will dis-
play:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Auto-Mute Programming
The Auto-Mute feature determines
whether a paged station’s microphone is
automatically enabled or disabled. To
program the Auto-Mute, enter the pro-
gramming mode and turn the [JOG] knob
until the display shows AUTO-MUTE.
The LCD will display:
Press the NAVIGATION [>] key to begin
programming the Auto-Mute. Rotate the
[JOG] knob to change the selection. The
LCD will display:
or
Press the [SAVE] key to confirm the set-
ting. The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
L4 GROUP
Turn Dial
>: enter
AUTO-MUTE
Turn Dial
>: enter
AUTO-MUTE
= On
Turn Dial
SAVE:save?
AUTO-MUTE
= Off
Turn Dial
SAVE:save?
AUTO-MUTE
= Off
Programmed!
L4 GROUP
= L04
Turn Dial
SAVE:save?
L4 GROUP
= L15
Turn Dial
SAVE:save?
L4 GROUP
= PRV
Turn Dial
SAVE:save?
L4 GROUP
= L12
Programmed!