Filter
Top Products
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 45
or
Press the [SAVE] to confirm the setting.
The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Prime Line Preference
Programming
The Prime Line is the one that has the
highest priority to go off-hook when the
station is idle and you lift the handset,
press the [SPEAKER] or [HEADSET]
keys. To program the Prime Line
Preference, enter the programming mode
and turn the [JOG] knob until the display
shows PRIME LINE. The LCD will dis-
play:
Press the NAVIGATION [>] key to begin
to select the Prime Line. Rotate the
[JOG] knob to change the selection. For
example, the LCD will display:
•
•
Press the [SAVE] key to confirm the
selection. For example, the LCD will dis-
play:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Line Group Programming
This setting allows lines 2, 3 and 4 to
have different telephone numbers for dif-
ferent stations (non-square). Stations
sharing the same telephone numbers on
a line need to be programmed as part of
the same group. To program the Line
Group, enter the programming mode and
turn the [JOG] knob until the display
shows LINE GROUP. The LCD will dis-
play:
Press the NAVIGATION [>] key to begin
programming the Line Group. Rotate the
[JOG] knob to change the CO Line. The
LCD will display:
•
•
L3 USAGE
= Off
Turn Dial
SAVE:save?
L3 USAGE
= Off
Programmed!
PRIME LINE
Turn Dial
>: enter
LINE GROUP
Turn Dial
>: enter
L2 GROUP
Turn Dial
>: enter
PRIME LINE
= L1
Turn Dial
SAVE:save?
PRIME LINE
= L4
Turn Dial
SAVE:save?
PRIME LINE
= L3
Programmed!