Filter
Top Products
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 42
Press the NAVIGATION [>] key to begin
to change the setting. Rotate the [JOG]
knob to select the CO Line. The LCD will
display:
•
•
or
(MSGW indicators for all CO Lines will
be turned on or off)
Press the NAVIGATION [>] key to select
which CO Line(s) to change. Rotate the
[JOG] knob to select On/Off. For exam-
ple, the LCD will display:
or
Press the [SAVE] key to confirm the set-
ting. For example, the LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting. NOTE: When a new
voice mail message is received the
VMWI light will flash automatically.
Turning the VMWI light on/off does not
disable the Voice Mail feature and the
phone’s ability to detect the FSK or
Stutter Dial Tone provided by your tele-
phone company.
Ringer On or Off Programming
The ringer may be turned off or on for
any of the lines. To program the Ringers
for each CO Line, enter the programming
mode and turn the [JOG] knob until the
display shows RINGER ON/OFF. The
LCD will display:
Press the NAVIGATION [>] key to begin
the Ringer On/Off programming. Rotate
the [JOG] knob to change the CO Line
number. The LCD will display:
•
•
or
L1 MSGW ON/OFF
Turn Dial
>: enter
L3 MSGW ON/OFF
= On
Turn Dial
SAVE:save?
RINGER ON/OFF
Turn Dial
>: enter
L1 RINGER ON/OFF
Turn Dial
>: enter
L4 RINGER ON/OFF
Turn Dial
>: enter
ALLRINGER ON/OFF
Turn Dial
SAVE:save?
L3 MSGW ON/OFF
= Off
Turn Dial
SAVE:save?
L3 MSGW ON/OFF
= Off
Programmed!
L4 MSGW ON/OFF
Turn Dial
>: enter
ALL MSGW ON/OFF
Turn Dial
>: enter