Filter
Top Products
NSQ412 Four-Line Caller ID Telephone Owner’s Manual 43
Press the NAVIGATION [>] key to select
which CO Line(s) to change. Rotate the
[JOG] knob to select On/Off. For exam-
ple, the LCD will display:
or
Press the [SAVE] key to confirm the set-
ting. The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Ringer Type Programming
The ringer sound may be set to one of
four different types for each line. To pro-
gram the Ringer Type for each CO Line,
enter the programming mode and turn
the [JOG] knob until the display shows
RINGER TYPE. The LCD will display:
Press the NAVIGATION [>] key to begin
programming the Ringer Type. Rotate
the [JOG] knob to change the CO Line
number. The LCD will display:
•
•
Press the NAVIGATION [>] key to select
which CO Line to change. You will hear
the ringer sound currently shown in the
display. Rotate the [JOG] knob to select
the Ringer Type. For example, the LCD
will display:
•
•
Press the [SAVE] key to confirm the
ringer type. For example, the LCD will
display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
L3 RINGER ON/OFF
= On
Turn Dial
SAVE:save?
L3 RINGER ON/OFF
= Off
Turn Dial
SAVE:save?
L3 RINGER ON/OFF
= Off
Programmed!
RINGER TYPE
Turn Dial
>: enter
L1 RINGER TYPE
Turn Dial
>: enter
L4 RINGER TYPE
Turn Dial
>: enter
L3 RINGER TYPE
=Type 1
Turn Dial
SAVE:save?
L3 RINGER TYPE
=Type 4
Turn Dial
SAVE:save?
L3 RINGER TYPE
=Type 2
Programmed!