Filter
Top Products
IPedge
Feature Operations
54 TOSHIBA
IPedge UG 06/11
4. Press Spkr. Your Msg LED turns Off. The Msg LED on the called
telephone flashes until the called party presses the flashing Msg button
which calls you back.
5. Turn off the Message LED.
The two ways to turn Off a Message LED are:
Method 1
1. Press #64 plus the extension number that has the message light
set.
2. Press Spkr or hang up to end the call.
Method 2
1. Dial the extension that has the Message LED.
2. Press 77.
3. Press Spkr or hang up to release your telephone.
Microphone Cut-Off This feature prevents callers from monitoring the sounds near your telephone
when your telephone receives a Handsfree Call or cuts-off the telephone
microphone while on a speakerphone call. When the feature is ON, the
Microphn Cut-off LED lights steady red and the Mic and Spkr LEDs do not
light when your telephone is called. When the feature is OFF, the Microphn
Cut-off LED is not lit and your microphone works. The Microphn Cut-off
functions on Handsfree Answerback and speaker OCA calls for privacy.
To turn the microphone ON/OFF
•
Press Microphn Cut-off to toggle between ON/OFF.
Off-Hook Call
Announce (OCA)
Off-hook Call Announce (OCA) enables you to complete a call to a busy
telephone. Your telephone must be programmed to either announce
automatically or to announce after you press a button on your dial pad. The
destination telephone must be programmed to accept an OCA. The
announcement may be delivered over the speaker.
Make an OCA Call •
Manual – Dial an extension. When you hear a busy tone press 5 and,
after one long tone, you can talk through the speaker of the destination
telephone. The person you are calling has answering options as
described below.
•
Automatic – If your telephone and the extension you are calling have
been programmed for Automatic OCA, you can talk through the speaker
of the destination telephone without hearing the busy tone and without
dialing 5.
Answer a Speaker OCA
Call
1. If you have a handset call in progress and you hear one tone, this
indicates that a second station is calling. The second caller connects to
the speaker in your telephone. The Spkr LED flashes and the Mic LED
lights. You will be speaking to the first caller through your handset and the
second caller through the microphone.