Filter
Top Products
IPedge
Preferences
108 TOSHIBA
IPedge UG 06/11
Dialing Tab Click Preferences > Dialing or Preferences > General > Dialing tab. Use this
tab to determine whether to follow a Server-based dial plan, use a dial plan
defined for your station, or dial all the codes yourself. The last option is not
practical when using a database or using “hot key” dialing since other
applications don’t know what is a valid number to dial including entering a
trunk access code when needed. If your System Administrator has set up the
Server-based Dial Plan, this is the best choice and will save you a lot of time.
Local Dialing Plan • Trunk Access Code – This must be set to the access code you need to
dial to get an outside line or trunk. Making outside calls using “Speed Dial”
keys or dialing from another program, a Trunk Access Code will
automatically be dialed to access a trunk before dialing the phone
number.
• Home Area Code – Your local area code should be defined here. This is
used only when you choose to use the Local Dial Plan.