Filter
Top Products
93
Operating several handsets
S100/150 colour Tchibo / UK / A31008-M1575-L131-1-7619 / registration.fm / 01.07.2005
Activating/deactivating the Walk and Talk mode
If you now press the talk key c or handsfree key d, the call is sent to all handsets that
are in Walk and Talk mode. The connection is made with the first handset that accepts
the Walk and Talk call.
Using the handset as a room monitor in Walk and Talk mode
You can still use the handset as a room monitor while in Walk and Talk mode.
The room monitor alarm call is sent to all handsets that are in Walk and Talk mode.
Press the display key
Off on the room monitor handset to deactivate the room monitor
function. The handset returns to normal Walk and Talk mode.
Open the menu.
[______________________________________________]
é
Select the menu item and confirm.
[______________________________________________]
Walk and Talk
Select the menu item and confirm.
Deactivating Walk and Talk mode:
[RRRRRRRRRR]
Off
Press the display key.
OK
OK
i
◆ The ring and signal tones can be set just like when your handset has
contact with the base station at home (page 95 and page 97).
◆ "Activating/deactivating the ringer tone" (page 98) and "Activating/
deactivating keypad protection" (page 11) are both possible in Walk
and Talk mode.
◆ To open the menu, press the display key ©.
◆ Switching your handset off and on again does not affect the Walk and
Talk mode.
[RRRRRRRRRRRRR]
Open the menu.
[______________________________________________]
Room Monitor
Select the menu item and confirm.
Scroll to the Room M.: line and activate the room
monitor function.
You can scroll to the Level: line if you want to set the
sensitivity for the noise level (Low or High).
[RRRRRRRRRRRRRRRRRRRRR]
Save
Press the display key. The room monitor function is
now activated.
à
OK
W
Before leaving, you should check the settings for the room monitor,
e.g. sensitivity and connection.