Filter
Top Products
111
Appendix
S100/150 colour Tchibo / UK / A31008-M1575-L131-1-7619 / appendix.fm / 01.07.2005
Authorisation
Your telephone is intended for operation in your country, as depicted on the underside
of the base station. Country-specific features have been taken into account.
The CE mark certifies conformity of the device with the essential requirements of the
R&TTE directive.
Excerpt from the original declaration
"We declare that the above mentioned product is manufactured according to our Full Quality Assur-
ance System certified by CETECOM ICT Services GmbH in compliance with ANNEX V of the R&TTE
Directive 99/05/EC. The presumption of conformity with the essential requirements regarding
Council Directive 99/5/EC is ensured"
Senior Approvals Manager
The Declaration of Conformity (DoC) has been signed. In case of need a copy of the orig-
inal DoC can be made available via the company hotline.
... the other person cannot
hear me?
You have pressed the u (INT)
key. This "mutes" the handset.
Re-activate the microphone
(page 22).
... the incoming call number is
not displayed although CLIP is
set?
The calling line identification is
not enabled.
The caller should permit call
line identification (CLI) by his
or her telephone company.
... the error beep is heard
while making an entry (rising
tone sequence)?
The action has failed or the input
is incorrect.
Repeat the procedure; read the
display message and, if neces-
sary, refer to the operating
instructions.
… I cannot listen to the net-
work mailbox?
Your PABX system is set to dial
pulsing.
Switch the PABX system to tone
dialling (page 109).
... an answering machine
message does not have a time
stamp?
The date/time are not set. Set the date/time (page 15).
... the answering machine
says ”PIN is incorrect” during
remote operation?
The system PIN entered is incor-
rect or still set to 0000.
Re-enter the system PIN or set a
PIN other than 0000
(page 101).
... the answering machine
does not record any messages
or has automatically switched
to announce only mode?
Its memory is full. Delete old messages.
Play back and delete new mes-
sages.
What has happened if ... Possible cause Possible solution