Filter
Top Products
62
SMS (text messages)
S100/150 colour Tchibo / UK / A31008-M1575-L131-1-7619 / sms_neutral_Bobo.fm / 01.07.2005
Text messages (SMS) on PABX systems
You can only receive an SMS if the calling number identification is sent to the PABX
extension (CLIP).
The CLIP of the SMS centre telephone number is evaluated in the telephone.
If your telephone is connected to a PABX, you may have to insert a prefix to the tele-
phone number (this depends on the PABX you use). The prefix can be saved on your
base station (page 108).
If in doubt, test your PABX system by sending an SMS to your own telephone number
after adding the prefix to the SMS centre telephone number. If the SMS does not arrive,
send another one without the prefix.
When you send an SMS, it may be transmitted without your extension number. In this
case, the receiver cannot answer it directly.
You can send and receive SMS messages on an ISDN PABX system only via the MSN
number assigned to your base station.
Errors when sending and receiving text messages (SMS)
Errors when sending an SMS
The following error codes may be displayed:
Errors when receiving an SMS
A message will appear in the display if your telephone cannot receive any more SMS
messages.
You may not be able to receive any SMS messages under the following circumstances:
◆ The calling line identification (CLIP) has not been activated for your telephone
number,
◆ Call redirect has been activated with When: All Calls (page 23),
◆ Call redirect for the network mailbox has been activated (All Calls)
◆ Memory (incoming and outgoing list) is full
Error code Description
E0 Permanent suppression of the telephone number is activated (CLIR).
It has not been activated by your telephone company.
FE Error while transmitting the SMS.
FD Error while connecting to the SMS centre.
If the SMS centre telephone number is missing or if it has been saved
incorrectly, no SMS messages can be sent or received. Check that you
have correctly saved the SMS centre telephone number.