Sony Telephone with Answering Machine Telephone User Manual


 
89
Operating several handsets
S100/150 colour Tchibo / UK / A31008-M1575-L131-1-7619 / registration.fm / 01.07.2005
Playing/deleting direct inward dialling announcement
Picking up a call
If a call is not accepted while direct inward dialling is activated, you can pick it up from
a different handset by pressing the talk key c. The call is indicated on this handset by
the flashing LED.
Using a handset as a room monitor
This function calls a previously stored internal or external number if a certain defined
noise level is reached (if the baby cries). When you answer the call, you will hear the
noise in the baby's room. Even after you hang up the room monitor function on the
handset remains active.
The distance between the handset and the baby should be between 1 and 2 metres.
The microphone must be facing the baby.
If the room monitor function is activated, incoming calls on that handset will be sig-
nalled without the ringer and shown only on the display. The display and keypad are
not illuminated.
When entering an external telephone number, make sure:
The handset in the baby's room is not barred for outgoing calls.
The number to which the alarm calls is sent is not blocked by an activated answering
machine.
Open the menu.
[______________________________________________]
í
Select the menu item and confirm.
[______________________________________________]
Call Director
Select the menu item and confirm.
either ...
Playing back the announcement:
[______________________________________________]
Play Announce
Select the menu item and confirm.
or ...
Deleting the announcement:
[______________________________________________]
Del Announce
Select the menu item and confirm.
[RRRRRRRRRR]
Yes
Press the display key to confirm the prompt.
Hold down (return to idle).
OK
OK
OK
OK
i
During playback you can activate the loudspeaker using the d key.
While you are listening to the announcement, you can press the
display key
New to re-record it.
W
Before leaving, you should check the settings for the room monitor,
e.g. sensitivity and connection.