Filter
Top Products
105
Setting the base station
S100/150 colour Tchibo / UK / A31008-M1575-L131-1-7619 / settings_bs_hs.fm / 01.07.2005
Changing the base station name
The name "Base station 1" to "Base station 4" is assigned automatically. You can change the
name of your base station.
Repeater support
You can use a repeater to boost the range and reception of your base station; it has to
be registered. Before you can use it, you have to activate the repeater function. This will
terminate any calls being made.
Resetting the base station to the factory setting
If you reset the base station, this will not affect the system PIN and handsets will remain
registered.
Open the menu.
[______________________________________________]
Settings
Select the menu item and confirm.
[______________________________________________]
Select Base
Select the menu item and confirm.
[ RRRRRRRRRRRRRRRRRRRRRRR]
Edit
Select the base station and press the display key.
Enter the new name (max. 16 characters) (for enter-
ing letters and characters see page 114).
[RRRRRRRRRRRRRRRRRRRRR]
Save
Press the display key to save the setting.
OK
OK
i
The name of the base station is handset specific, i.e. the base station
receives the name assigned to it from the corresponding handset. The
same base station can have different names on different handsets.
Open the menu.
[______________________________________________]
í
Select the menu item and confirm.
[______________________________________________]
Add. Features
Select the menu item and confirm.
[______________________________________________]
Repeater Mode
Select the menu item and confirm.
[RRRRRRRRRR]
Yes
Press the display key to confirm the prompt.
OK
OK
OK
Open the menu.
[______________________________________________]
í
Select the menu item and confirm.
[______________________________________________]
Base Reset
Select the menu item and confirm.
Enter the system PIN (factory setting: 0000) and con-
firm.
[RRRRRRRRRR]
Yes
Press the display key to confirm the prompt.
OK
OK
OK