Filter
Top Products
109
Connecting the base station to a PABX
S100/150 colour Tchibo / UK / A31008-M1575-L131-1-7619 / pabx.fm / 01.07.2005
Pause after R key
You can change the length of the pause if your PABX requires this (see your PABX oper-
ating instructions; factory setting: 1600 ms).
Changing the dialling pause (Pause after prefix)
Prerequisite:
You have saved a prefix (page 108). Factory setting: 3 seconds.
Switching temporarily to tone dialling (DTMF)
If your PABX still operates with dial pulsing (DP) but tone dialling (DTMF) is required (e.g.
to check the network mailbox), you must switch to tone dialling during the call.
Prerequisite: You are conducting a call.
Open the menu.
Press key.
Enter the pause length (1 = 800 ms; 2 = 1600 ms;
3 = 3200 ms) and confirm.
OK
Open the menu.
Press key.
Enter the pause length (1 = 1 second; 2 = 2 seconds;
3 = 3 seconds; 4 = 6 seconds) and confirm.
OK
Open the menu.
[______________________________________________]
Tone Dialing
Select the menu item and confirm. Tone dialling is
active for this call.
OK