Filter
Top Products
Sipura SPA-841 Telephone User Guide System Telephone Features 27
620-05600270
1. Press *67 on the telephone keypad.
2. Press the dial soft key or lift the handset.
3. Dial the phone number that you want to not show your Caller ID to.
Conference
If supported by your system, you can conference several internal and/or external
parties together. Check with your system administrator for the availability of this
feature on your system.
To create a conference call, follow these steps:
1. Make a call or be engaged in a call.
2. Press the conf soft key.
3. Dial the number of the person that you want to include in the conference and
press the dial soft key.
4. When the person answers, inform the party about the conference and then
press the conf button to add that party into the conference call.
5. Repeat steps 1-3 to add additional parties to the conference.
Conference Call Tips
• The parties connected to the conference call remain connected to each
other while you add additional parties. They may carry on a conversation
with each other while you finish adding parties to the conference.
• Even if the call initiator disconnects, any of the other parties (who have
the conference feature) can use it to add new parties.
• To place a conference call on hold, press the Hold button. The other
parties can talk among themselves but they can’t hear you.
• When you put the call on hold, a beeping tone automatically sounds every
few seconds. To avoid disrupting the other callers, consider muting the
call instead. To mute the call, press the Mute button.
• To transfer a conference call to another telephone, press the xfer soft key.
Dial the number to which you want to transfer the call and then press xfer
key again.
Dial Tone and Ringer Patterns
The T6000 telephone system generates different ringer and dial tones, depending
on call conditions.
There are two types of dial tone:
• Internal Dial Tone – A continuous, higher-pitched tone