Filter
Top Products
26 System Telephone Features Sipura SPA-841 Telephone User Guide
620-05600270
Switching Between Held Calls
To switch between calls, press the red blinking line button. The other line will
automatically be put on hold.
Suspending Call Waiting
You can suspend Call Waiting just for the next call by entering *70 and then
entering the number you wish to call. Any subsequent call coming in will go directly
to your voice mail or other specified “no answer” destination. Call Waiting will be
enabled again when you disconnect from the call.
Call Waiting with Caller ID
If you have both the call waiting and caller ID capabilities, you can see the caller ID
of a call waiting call on your telephone's display.
Call Waiting with ID Manager
While already on a phone call, this feature allows the user to view the Caller ID of
a second incoming phone call and decide how the second call should be handled.
The user has four options:
• Answer the new call and put the current on hold.
• Press 1 to send the call to voice mail.
• Press 2 to send a "Please Hold" announcement to the incoming caller.
• Press 3 to send a "Call Me Back" announcement to the incoming caller.
After the announcement is played, the call is disconnected.
This feature must be turned on by your system administrator for you to have access
to its functions.
NOTE:
If you have a line-appearance of another phone on your phone, and a
call comes in for the other line, you can only use the 2 - “Please Hold” feature
to put the call on hold.
Pressing 1 or 3 for an incoming call for the other line-appearance will
disconnect the caller from your phone, but the call will continue to ring on the
other phone.The “send to voice mail” and “Call Me Back” features are not
available because the call may still be picked up on the phone that the line is
assigned to as a prime line.
Caller ID Block
This feature blocks the display of your phone number to the called party for this call
only. Be aware that if the person you are calling does not accept anonymous calls,
your call will be rejected since no Caller ID information is provided.