Samsung SCH-i760 Telephone User Manual


 
Bluetooth and Wi-Fi Services 154
Changing Connection Information
Changing Connection Information
Using either the Wireless or Network Adapters tabs under “Network Card,” you can
change your connection information. If your Wi-Fi network encrypts data with a
security key (WEP) or you need WPA authentication to connect to your Wi-Fi network,
you can set the configurations under Wireless tab. The Network Adapters tab allows
you to choose whether you use a fixed IP or the DHCP (Dynamic Host Control
Protocol).
To get the connection information for the Wi-Fi network you are connected to, follow
these steps:
1. Tap Start ( ) located in the upper left corner of the screen.
2. Tap Settings ( ). By default, the Personal tab is highlighted.
3. Tap the Connections tab.
4. Tap Wi-Fi ( ) to open the Configure Wireless Networks screen.
5. Tap the Network Adapters tab.
6. The current connection property appears in the My network card
connects to:, and displays as either The Internet or Work.
Tap The Internet if the network connects to the Internet (does not use proxy
settings) or Work (uses proxy settings).
7. If your Wi-Fi network encrypts data with a security key (WEP) or you need
WPA authentication to connect your Wi-Fi network, you can set the
configuration on the Wireless tab.
8. Tap the adapter you wish to change or configure.
9. From the screens that follow, set or change the settings, and tap to
save your changes.
10. Confirm the changes, and tap again to return to the previous screen.
ok
ok