Filter
Top Products
147
7.
Tap to save your changes and return to the previous screen.
Note: If you do not want your i760 to be discoverable, clear the “Make this device discoverable to other
devices” check box.
Bluetooth Bonds
A bond is a relationship that you create between your i760 and another Bluetooth
wireless technology enabled devices to exchange information in a secure manner.
Creating a bond involves entering the same Passkey on the two devices sharing a
bond. Once a bond is created between devices, the devices do not have to be
discoverable to exchange information; however, each device must have its Bluetooth
radio on.
Bonds are created only once between devices. Once a bond is created, devices can
exchange information as soon the bond is recognized, eliminating the need to
discover one another or to enter security features like a common Passkey.
Creating Bluetooth Bonds
You can create a bond between your device and another device that has Bluetooth
wireless technology. Once you do this, Bluetooth doesn't need to be in discoverable
mode in order for you to beam information between the two devices; the Bluetooth
radio only needs to be turned on. For more information, refer to "Adding a Bluetooth
Device" on page 85.
1. Make sure that the two devices are within range of one another and that
Bluetooth discoverable mode is enabled on both devices.
2. Tap Start ( ) located in the upper left corner of the screen.
3. Tap Settings ( ). By default, the Personal tab is highlighted.
4. Tap the Connections tab.
5. Tap Bluetooth ().
6. Tap the Devices tab and select Add new device from the on screen list.
Your phone will then display a list of discovered Bluetooth devices which
have been detected within its communication range.
7. Tap/select the device you wish to pair with and tap the Next soft key.
8. Enter a Passkey, which should be between 1 and 16 characters, and press
the Next soft key. You are then notified the pairing is in progress.
Note: You must enter the same Passkey on both devices.
ok