Philips 380 Vox Telephone User Manual


 
Base station
40
Service code settings
When you subscribe to extra services with your operator you may need to set some codes in your
phone.
The default codes are the codes used by the main national network operator.
If you subscribed to another operator you may need to change the codes.
Contact your network operator for more information on the services (see page 35).
To change a service code
1- Go to Base station, validate
2- Scroll to Service code settings, validate
3- Select the appropriate service, validate
4- Select Change and enter the new code and validate
To change the operator type (country dependent)
1- Go to Base station, validate
2- Scroll to Line settings, validate
3- Scroll to Operator type, validate
4- Select among the suggested types and validate
Note : Useful if the Caller Display service does not work when you
subscribed to that service.The default setting is type 1.
To activate/deactivate the first ring
To prevent the phone from ringing when receiving an SMS, the first ringer is
deactivated.You can activate it.
1- Go to Base station, validate
2- Scroll to Line settings, validate
3- Scroll to First ring, validate
4- Select ON/OFF, validate
Onis 380 master UK_indice2.qxd 18/08/03 10:04 Page 40