Palm m500 PDAs & Smartphones User Manual


 
Page 220 Setting Preferences for Your Handheld
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK.
Wait For
Tells your handheld to wait for specific
characters from the TCP/IP server before
executing the next command.
Wait For
Prompt
Detects a challenge-response prompt coming
from the server and then displays the dynamically
generated challenge value. You then enter the
challenge value into your token card, which in
turn generates a response value for you to enter
on your handheld. This command takes two
arguments, separated by a vertical bar (|) on the
input line.
Send
Transmits specific characters to the TCP/IP
server to which you are connecting.
Send CR
Transmits a carriage return or LF character to the
TCP/IP server to which you are connecting.
Send User
ID
Transmits the User ID information entered in the
User ID field of the Network Preferences screen.
Send
Password
Transmits the password entered in the Password
field of the Network Preferences screen. If you
did not enter a password, this command
prompts you to enter one. The Password
command is usually followed by a Send CR
command.
Delay
Tells your handheld to wait a specific number of
seconds before executing the next command in
the login script.
Get IP
Reads an IP address and uses it as the IP address
for your handheld. This command is used with
SLIP connections.
Prompt
Opens a dialog box and prompts you to enter
text of some kind (for example, a password or a
security code).
End
Identifies the last line in the login script.