Nortel Networks BM450 Telephone User Manual


 
28 Chapter 3 Hardware Troubleshooting
NN40160-700NN40160-700
Figure 5 Example: Bootloader.log file with no errors
Figure 6 Example: Boot file with errors
Testing basic hardware functionality
This section describes how to test the components of the BCM450 system, and how to
troubleshoot them if they fail the test.
Use the following procedures to help isolate and identify problems with your BCM450 hardware:
To test the main unit on page 29
To troubleshoot the main unit on page 29
To test the expansion unit on page 29
To troubleshoot the expansion unit on page 30
Testing an MBM on page 30
Troubleshooting the FEM on page 31
To determine why the ATA 2 does not function on page 31
To determine why there is no dial tone at the ATA2 on page 32
To check the ATA2 wiring on page 32
Reset to factory settings on page 32
To perform a Level 1 reset (configuration reset) on page 34