![](http://pdfasset.owneriq.net/3/00/300c489c-412b-454c-9718-39d58290c175/300c489c-412b-454c-9718-39d58290c175-bg19.png)
Chapter 3 Hardware Troubleshooting 25
BCM450 Troubleshooting Guide
2 Select the System folder and click the Keycodes task.
The Keycodes panel displays and the installed features appear in the Keycodes list.
3 To enter a new keycode, click Load File.
4 Browse to where you saved the keycode file you downloaded from KRS.
5 Click Open.
The file uploads and the feature appears in the Keycodes list.
To verify the keycodes using Telset
1 Select Feature 9*8 from a two-line display telephone.
2 Enter the following user ID and password:
User ID: SETNNA
Password: CONFIG
The numerical values of the user ID and password are 738662 and 266344, respectively.
3 Press NEXT to scroll through the menu and select Feature Codes.
4 Press OK.
The system ID (SID) displays.
5 Press NEXT.
6 Enter your sequence ID.
7 Press NEXT to scroll through the list and perform one or both of the following tasks:
a To activate features, select Feature List.
• Press SHOW to view the available features.
• Use the soft keys to activate features for your system.
b To enter a new keycode, select Entitlement Code.
• Press SHOW to view the current keycode.
• Use the soft keys to modify the keycode for your system.
Restart or shut down the system
You can use the Reset utility in Element Manager to:
• reboot the BCM450 system
• perform a warm reset of telephony services
• perform a cold reset of telephony services
• shut down the system
Use this procedure to restart the system.