Nortel Networks BM450 Telephone User Manual


 
26 Chapter 3 Hardware Troubleshooting
NN40160-700NN40160-700
To restart the system
Use this procedure to restart the system from the Element Manager.
1 Select Administration > Utilities > Reset.
2 Click the appropriate reset button.
Table 5 lists the Reset functions.
Table 5 Reset functions
Function Description Impact
Reboot BCM450 System Restarts the operating system of the
BCM450 system
Temporarily stops all services on the
system. Restarts all services.
This operation does not affect
configuration parameters or
programming.
Warm Reset Telephony
Services
Restarts telephony services running
on the BCM450 system
Restarts all telephony services,
including LAN CTE, Voicemail, and
IP telephony.
This operation does not affect
configuration parameters or
programming.
Cold Reset Telephony
Services
Resets telephony programming of
the BCM450 system to the factory
defaults for that software level
Affects all telephony services,
including LAN CTE, Voicemail, and
IP telephony.
Telephony services restart with all
telephony programming at default
values for the specified region,
template, and start DN, for the
current software release level.
A cold reset erases voice message
mailboxes and messages if the DN
length is not set to system defaults.
For information about setting the DN
length, refer to the BCM450 Device
Configuration Guide.
Shutdown BCM System Shuts down the BCM450. Stops all services running on the
system.